Qualified electricians, full wiring safety reports








Long Eaton landlords need a valid EICR for every private rented property in England, and our qualified electricians carry out full wiring inspections across NG10. We test the fixed installation, from the consumer unit to sockets, switches, lighting points, earthing and bonding, then issue a report that shows whether the system is satisfactory or needs remedial work. The inspection follows BS 7671 standards and gives a clear record for the tenancy file, insurance checks and compliance visits. If a property has just changed hands on Derby Road, Bennett Street or near Station Street, an early inspection helps identify faults before they become dangerous.
The town's stock includes older terraces, converted mills and newer homes, so the state of the wiring can vary sharply from one address to the next. Long Eaton Town Centre Conservation Area, the Mills Conservation Area and the former lace factory buildings on sites such as Bridge Mills and Oakleys Mills point to an installation history that often includes older circuits, altered boards and mixed protection. Flood warning areas around the Rivers Trent and Erewash add another layer of risk, because water ingress can damage sockets, boards and concealed connections. Long Eaton had an estimated population of 38,240 in 2024, and that scale of housing means our electricians see a wide range of electrical systems in one local area.

Our inspection starts at the consumer unit, where we look at the condition of the board, protective devices and labelling before any testing begins. We then check earthing and bonding, socket outlets, light fittings, switches and the visible parts of fixed wiring, because worn accessories often point to hidden defects elsewhere in the circuit. Dead tests cover insulation resistance, continuity and polarity, while live tests cover RCD operation and external earth loop impedance. A careful report depends on all of those readings being taken in the right order, not on a quick visual glance.
Converted mill buildings on Derby Road, Victorian terraces near the town centre and newer flats in schemes such as Bridge Mills can all hide different electrical patterns behind the plaster. Rewireable fuses, mixed cable types, old metal consumer units and poorly added circuits still turn up in Long Eaton properties, especially where homes have been altered over time. We inspect the full installation, not just the obvious bits in the hallway, because faults can sit in lofts, under floors and at the rear of extensions. Our qualified team records each observation clearly, so landlords know what needs action and what simply needs monitoring.

Since 1 April 2021, every private rented property in England must have a valid EICR, and that report must be renewed at least every 5 years unless the electrician recommends an earlier date. Our electricians are qualified and registered with a competent person scheme, which is the standard landlords should look for before booking an inspection. A copy of the report must be given to existing tenants within 28 days, and local authorities can ask for it during compliance checks. Penalties can reach £30,000 per breach, so the paperwork matters as much as the testing itself.
homedata.co.uk records show Long Eaton's average sold price over the last year at around £239,696, with semi-detached homes averaging £224,437, detached homes £337,157 and terraced homes £174,910. Another market read puts the average at £223,342, with a 3.11% rise over 12 months, while sales totalled 470 residential transactions and were down 14.04% on the previous year. Those figures do not change the EICR rules, but they do show a town where homes change hands often enough for electrical paperwork to matter at sale, let and renewal stages. When buyers and tenants are looking at older stock around the town centre or the mills area, a current report helps answer the first questions about safety.
Long Eaton's building history explains why electricians keep finding mixed installations in the area. The Town Centre Conservation Area was designated in 1993, the Mills Conservation Area in February 1983, and the lace factories in that second area date from 1903 to 1906. Red brick, stone dressings, terracotta, glazed brick, rendered elevations and natural Welsh slate all appear across the local stock, and each material era tends to bring a different electrical story behind the walls. Add the £25 million regeneration programme, new homes at Bennett Street, Oakleys Mills and Bridge Mills, and the town ends up with a sharp split between newer wiring and much older systems.
Landlords with flats in converted factories, houses split into multiple rooms or older terraces near Station Street should treat an inspection as a routine compliance task, not a one-off nuisance. The same applies to properties around Wentworth Street, Middleton Street and Lower Street, where surface water risk can make sockets, basement spaces and lower-level circuits more vulnerable after heavy rain. We often find that the age of the building is only part of the story, because later alterations, DIY additions and patchy upgrades can create a worse electrical picture than the original installation. Our report sets that out plainly, so there is no guesswork about what needs attention next.
EICR codes tell the story of the installation in a precise way. A C1 means danger is present, so immediate action is needed and the circuit may need to be made safe at once. A C2 means a potentially dangerous defect exists, which needs urgent remedial work. C3 means improvement is recommended, but the report can still be classed as satisfactory if no C1, C2 or FI items are present.
FI means further investigation is needed before a final view can be given. That code often appears where concealed wiring, inaccessible accessories or an old consumer unit prevents a full judgement on the spot. Satisfactory does not mean perfect, it means the installation is not deemed unsafe at the time of inspection. Unsatisfactory means one or more serious items need attention before the installation can be signed off for the tenancy record.

Use our quote form and choose Long Eaton. We arrange a convenient visit for the property and confirm the inspection scope.
A qualified electrician registered with a competent person scheme attends and checks the installation age, consumer unit type and circuit layout.
We look over switches, sockets, accessories, bonding, earthing and signs of damage before any test gear comes out.
Power comes off briefly so we can check continuity, insulation resistance and polarity safely.
We measure earth fault loop impedance, RCD response and other live values, then record any observations.
The EICR sets out the outcome, lists any C1, C2, C3 or FI items and tells the landlord what action is needed.
A failed EICR means the installation has at least one issue that cannot be ignored. C1 findings need immediate action, while C2 faults need urgent remedial work and should not be left until the next tenancy event. FI items need extra investigation, because the report does not yet have enough evidence for a final view. In practical terms, the landlord has a safety problem and a compliance problem at the same time.
Once a C1 or C2 defect appears, the landlord must begin remedial work within 28 days and complete it within the period set out by the report, or sooner if the electrician recommends a shorter timeline. The tenant must receive a copy of the report, and the local authority also has to be told in writing when required. After repairs, we return to check the work and issue confirmation where needed, so the file shows that the installation has been brought up to standard. If the fault involves a live danger, our team may isolate the affected circuit before leaving the property.
Flood-prone parts of Long Eaton need extra care because moisture can make small electrical defects much worse. Properties around Bennett Street sit in a designated flood warning area for the River Erewash, while parts of Wentworth Street, Middleton Street and Station Street have a high surface water risk. Water around sockets, basement stores or consumer units can turn a minor defect into a serious one, especially in older brick buildings with mixed refurbishments. That is why an unsatisfactory report should trigger fast action, not a waiting game.
Homeowners do not have a legal duty to renew an EICR every 5 years, but a full inspection is still a sensible check on the wiring. We normally recommend a report every 10 years for an owner-occupied property, or sooner where the installation is older, altered or showing signs of wear. A property built around the Victorian and Edwardian periods, or one converted from a lace factory on Derby Road, often has a wider spread of circuit ages than a newer home on a fresh estate. That can affect consumer unit protection, cable condition and the way circuits respond to modern loads.
homedata.co.uk records show Long Eaton's housing market sitting around £239,696 on average over the last year, with semis at £224,437, detached homes at £337,157 and terraces at £174,910. Another market read places the average at £223,342, with a 3.11% rise over 12 months and 470 residential sales over the last year. Those numbers matter because sellers often order an EICR before listing, especially where an older house has had extensions, loft work or a change from family use to rental use. Our electricians also see homeowners ask for an inspection after buying in the town centre, where older stock and later alterations often sit side by side.

Yes. Every private rented property in England needs a valid EICR, and the report must be renewed at least every 5 years unless the electrician sets an earlier review date. A copy must be given to tenants within 28 days, and the local authority can ask for proof of compliance. If the report shows C1 or C2 issues, remedial work must follow quickly, with penalties of up to £30,000 for breaches.
Our EICRs start from £120. The final figure depends on the size of the property, the number of circuits, the age of the installation and how easy the consumer unit is to reach. A small flat in a newer block can take less time than a converted mill or a larger house with several altered circuits. We give clear pricing before the booking goes ahead.
Landlords need a report every 5 years, or sooner if the electrician recommends it after an inspection. Homeowners usually book one every 10 years, though older wiring or a property that has been altered may need a shorter interval. Houses that have had extensions, loft conversions or a change of use often benefit from earlier testing. A fresh report also helps before a sale or remortgage.
A failed report means there is at least one C1, C2 or FI item that needs attention. C1 faults are dangerous, so they may need immediate isolation, while C2 defects need urgent repair and retesting. Once the work is complete, we return to confirm the remedial action where required. The property should not be treated as compliant until the dangerous issues are dealt with.
Most inspections take 2-4 hours, depending on the property size and the number of circuits. A compact flat with a simple consumer unit is usually quicker than a larger house with extensions, outbuildings or a split layout. We need short periods with the power off for dead testing, then we carry out live testing and record the results. Older or more complicated properties can take longer because access and circuit tracing take extra time.
C1 means danger is present and immediate action is needed. C2 means a potentially dangerous defect exists and needs urgent remedial work. C3 means improvement is recommended, but it does not stop the report being classed as satisfactory on its own. FI is separate again, and it means further investigation is needed before the installation can be judged properly.
Yes, especially once it has been occupied for a few years or if the owner wants a current safety record. Even a new apartment can pick up damage, alteration or poor accessory replacement after handover. In Long Eaton, we see that kind of follow-on wear in newer schemes as well as in older terraces. A clean report gives a clear baseline for the future.
From £60
Annual gas check for rented homes
From £55
Energy rating report for sales and lets
Price on request
Pre-purchase survey for standard homes
Price on request
Full structural survey for older or altered homes
Our EICRs in Long Eaton start from £120, with the final price shaped by the size of the property and the number of circuits to test. A one-bed flat at Bridge Mills or another modern apartment can be quicker to inspect than a larger detached house or a converted mill building with several altered circuits. Older consumer units, extra extensions and hard-to-access loft wiring can all increase the time on site. That is why we quote for the property, not for a one-size-fits-all label.
Long Eaton's housing mix has a clear spread, from terraced homes averaging £174,910 through to detached homes averaging £337,157, according to homedata.co.uk records. Semi-detached stock sits around £224,437, and the wider average over the last year is around £239,696, with another market read placing it at £223,342. Those values do not set the EICR price, but they do show the range of homes our electricians inspect across the town, from compact terraces to larger family houses and converted industrial spaces. When a property has been altered over time, the inspection tends to take longer because every circuit must be traced and checked properly.
After the visit, we issue the report and set out any observations in plain language, so the next step is clear. If remedial work is needed, we can quote for the repairs after the inspection has identified the exact issue, whether that is a C1, C2 or an FI that needs more testing. Landlords using our service across Long Eaton, Sawley and the nearby parts of Erewash get a practical record they can file, share and act on. For properties affected by flooding, older wiring or a recent refurbishment, that report is often the first real snapshot of the installation in years.
Electrical Installation Condition Report In London

Electrical Installation Condition Report In Plymouth

Electrical Installation Condition Report In Liverpool

Electrical Installation Condition Report In Glasgow

Electrical Installation Condition Report In Sheffield

Electrical Installation Condition Report In Edinburgh

Electrical Installation Condition Report In Coventry

Electrical Installation Condition Report In Bradford

Electrical Installation Condition Report In Manchester

Electrical Installation Condition Report In Birmingham

Electrical Installation Condition Report In Bristol

Electrical Installation Condition Report In Oxford

Electrical Installation Condition Report In Leicester

Electrical Installation Condition Report In Newcastle

Electrical Installation Condition Report In Leeds

Electrical Installation Condition Report In Southampton

Electrical Installation Condition Report In Cardiff

Electrical Installation Condition Report In Nottingham

Electrical Installation Condition Report In Norwich

Electrical Installation Condition Report In Brighton

Electrical Installation Condition Report In Derby

Electrical Installation Condition Report In Portsmouth

Electrical Installation Condition Report In Northampton

Electrical Installation Condition Report In Milton Keynes

Electrical Installation Condition Report In Bournemouth

Electrical Installation Condition Report In Bolton

Electrical Installation Condition Report In Swansea

Electrical Installation Condition Report In Swindon

Electrical Installation Condition Report In Peterborough

Electrical Installation Condition Report In Wolverhampton

Qualified electricians, full wiring safety reports
Get A Quote & BookMost surveyors take 1-2 days to quote.
We'll price your survey in seconds.
Most surveyors take 1-2 days to quote.
We'll price your survey in seconds.





Homemove is a trading name of HM Haus Group Ltd (Company No. 13873779, registered in England & Wales). Homemove Mortgages Ltd (Company No. 15947693) is an Appointed Representative of TMG Direct Limited, trading as TMG Mortgage Network, which is authorised and regulated by the Financial Conduct Authority (FRN 786245). Homemove Mortgages Ltd is entered on the FCA Register as an Appointed Representative (FRN 1022429). You can check registrations at NewRegister or by calling 0800 111 6768.