Qualified electricians, full wiring safety reports








Our qualified electricians carry out full electrical inspections across Corby, from Priors Hall Park and The Avenue to Corby Old Village and Rockingham Road. An EICR checks the fixed wiring, consumer unit, earthing, bonding, sockets and light fittings, then records any defect against BS 7671. For landlords, this report is a legal duty in England and it must be issued by a qualified person registered with a competent person scheme. We can book the inspection online and give you a clear pass or fail outcome.
Corby's housing mix makes periodic testing sensible. homedata.co.uk records an average house price of £233,980, with 1,029 sales in the last 12 months, and the stock is split across 33.7% semi-detached homes, 28.5% terraced homes, 19.1% detached homes and 18.2% flats or maisonettes. Many homes were built during the post-war expansion linked to the steelworks, while Corby Old Village, Rockingham and Great Oakley still have older properties that may carry legacy wiring or later alterations. New estates in NN17, including Priors Hall Park, Weldon Manor and The Avenue, still need the same five-year check once they enter the rental market.

£233,980
Overall average house price
-0.6%
12-month average price change
1,029
Homes sold in the last 12 months
68,160
Population (2021 Census)
27,273
Households (2021 Census)
33.7%
Semi-detached homes
28.5%
Terraced homes
18.2%
Flats, maisonettes or apartments
Using listing data from home.co.uk and property data from homedata.co.uk
We test the installation from the consumer unit outwards. That means circuit breakers, RCD protection, main earthing, main bonding, socket outlets, light fittings, fixed wiring and the visible condition of accessories all come under review. Our electricians also carry out continuity testing, polarity testing, insulation resistance testing and external earth loop impedance checks, so we can see how the system behaves under load and fault conditions.
Corby's homes vary a lot from one street to the next. A mid-century terrace near the town centre may still have older cable runs or a replacement fuse board, while a newer home in Priors Hall Park may have a modern consumer unit but still need testing after alterations, additions or DIY work. Dead testing is done with the power off for a short period, then live testing follows so we can confirm that protection devices operate as they should.

Landlords in Corby must have an EICR carried out at least every 5 years under the Electrical Safety Standards in the Private Rented Sector (England) Regulations 2020. The report must be completed by a qualified electrician, handed to the tenant within 28 days, and kept ready for local authority inspection if requested. If the report identifies C1 or C2 observations, remedial work must be completed within 28 days, or sooner if the electrician says the risk needs immediate action. Failure to comply can lead to enforcement action and penalties of up to £30,000 per breach.
The local housing mix matters here. Corby has a large share of semi-detached and terraced homes, with many built between 1945 and 1980 when the town expanded quickly around the steelworks. Those properties often have mixed-age installations, especially where kitchens, extensions or rewires were added at different times. We also see newer rental homes at Priors Hall Park, Weldon Manor and The Avenue in NN17, where the wiring may be newer but still needs a formal inspection once the tenancy cycle reaches the five-year limit.
Older pockets need a sharper eye. Corby Old Village, Rockingham and Great Oakley include pre-1919 and 1919-1945 homes, plus listed buildings and conservation area properties where earlier electrical work may have been altered many times. North Northamptonshire Council can act if a landlord ignores an unsafe report, so we keep the wording clear and practical. If a circuit has exposed live parts, poor earthing or signs of overheating, our report explains the defect, the code and the next step.
We code every issue so the outcome is easy to read. C1 means danger is present and we need to make the situation safe straight away. C2 means a potentially dangerous defect that needs urgent remedial work, while C3 is an improvement recommendation that does not stop the report from being satisfactory. FI means further investigation is needed before we can close out the item.
Those codes matter in a Corby property as much as anywhere else. A worn socket in a terraced home off Rockingham Road may be a C2 if the wiring behind it is poor, while a missing label inside a consumer unit in Priors Hall Park might be a C3 if the rest of the installation tests well. Our electricians always separate the visual findings from the test results, so you know which issues affect safety now and which ones should be planned for later.

Use our booking form and choose a slot that suits the property in Corby, whether it is a flat, terrace or detached house.
We send a qualified electrician who is registered with a competent person scheme and knows how to test to BS 7671.
Our team checks the consumer unit, earthing, bonding, sockets, light fittings and visible fixed wiring before any testing starts.
Power is switched off briefly so we can test insulation resistance, continuity and polarity without energising the circuits.
We then confirm RCD operation, earth fault loop impedance and the performance of the installation under live conditions.
You receive the EICR with each observation code, the overall result and clear next steps for any remedial work.
An unsatisfactory EICR means one or more items have been coded C1, C2 or FI. Our electricians explain the issue in plain language, then say whether the circuit needs to be isolated, repaired or investigated further. In a Corby rental, that might be a damaged socket circuit in a terrace near the town centre or an ageing consumer unit in a post-war semi on the edge of NN17. The important point is simple: the report is not the end of the job, it is the start of the safety fix.
Landlords must act quickly. C1 and C2 findings need remedial work within 28 days, and the report should be updated once the repairs are complete. If a follow-up inspection is needed, we check the repaired circuit again and confirm whether the installation now meets the standard expected under BS 7671. Tenants should not be left with live faults or uncertain protection, especially where the property is occupied and the issue affects everyday use of sockets or lighting.
Local enforcement can follow if nothing is done. North Northamptonshire Council can ask for the paperwork and may take action where a landlord ignores an unsafe report or fails to pass a copy to the tenant within 28 days. That matters in Corby because the rental stock ranges from older village properties in Corby Old Village and Great Oakley to newer homes at Weldon Manor, and each type can hide different defects. We keep the wording in the report direct, so there is no guesswork about what needs fixing next.
Homeowners in Corby do not need an EICR by law, but a regular inspection is still a sensible part of looking after the property. We usually recommend every 10 years for an owner-occupied home, or every 5 years where the installation is older, has been altered, or has had repeated repairs. That advice fits many houses in Corby Old Village, Rockingham and Great Oakley, where older wiring may have been updated in stages rather than replaced in one go.
An EICR is also useful before a sale, after a renovation or if the insurer asks for proof of electrical condition. Corby's housing stock includes many mid-20th-century homes built around post-war growth, so sockets, switches and consumer units may no longer match current standards even if the property looks tidy. New homes at Priors Hall Park or The Avenue can still benefit from testing once appliances, extensions and DIY changes start to build up over time.

Yes. In England, private rented homes must have a valid EICR at least every 5 years, and the report must be completed by a qualified electrician. We also give landlords a copy to pass to the tenant within 28 days. If the report shows C1 or C2 items, the remedial work needs to be done quickly and the paperwork kept up to date.
Our EICR bookings start from £120. The final price depends on the size of the property, the number of circuits, how old the installation is, and how long the inspection takes. A compact flat in Corby usually costs less than a larger detached home in Weldon Manor or a property with a lot of additions and outbuildings.
Landlords need one every 5 years, or sooner if the report says the installation should be checked again earlier. Homeowners do not have a legal cycle, but a 10-year interval is a common rule of thumb, with shorter gaps for older homes in Corby Old Village or houses that have been heavily altered. If the electrician finds something that needs follow-up, the next inspection may be brought forward.
A failed, or unsatisfactory, EICR means there is at least one C1, C2 or FI observation. We explain what is unsafe, what needs isolation, and what needs urgent repair. For landlords, the next step is remedial work, followed by a re-check where needed so the installation can be brought back to a satisfactory condition.
Most inspections take 2-4 hours, depending on the size of the property and how many circuits we need to test. A flat in Priors Hall Park is usually quicker than a large detached house with extensions, a loft conversion and extra garage circuits. If we need to open up access panels or carry out more investigation, the visit can take longer.
C1 is danger present and needs immediate action. C2 is potentially dangerous and needs urgent remedial work, while C3 is an improvement recommendation and does not make the report fail on its own. FI means further investigation is needed before we can say whether the item is safe.
Yes. We cover properties in Corby Old Village, Rockingham and Great Oakley, including older homes and listed buildings. These properties often need a careful approach because earlier electrical work may have been altered several times. Our report still follows the same coding system, but the findings can be more detailed where the installation has a long history.
In most homes, yes. We may need to switch the power off for part of the test, so sockets, lighting or appliances may be unavailable for short periods. That is normal, and we plan the work so the disruption stays brief, especially in occupied rentals or family homes across NN17.
From £60
Annual gas check for rented homes across Corby, Weldon and NN17
Price varies
Energy rating assessment for rentals and sales in Corby
Price varies
Survey for standard homes in Priors Hall Park and across Corby
Price varies
Detailed survey for older homes, listed buildings and properties with defects
Our EICR bookings in Corby start from £120. The final fee depends on property size, the number of circuits, the age of the installation and how much testing is needed on the day. A flat may be straightforward, while a detached home in Weldon Manor or a larger family house in Priors Hall Park can take longer because there are more circuits, accessories and consumer-unit checks to complete.
The inspection price includes the visual check, dead testing, live testing and a written report with the observation codes and overall result. If we find a problem that needs remedial work, we quote separately for the repair so the landlord or homeowner can make a clear decision. That keeps the process tidy for Corby properties of every age, from post-war terraces to newer builds and older homes in Corby Old Village.
Report turnaround is usually quick once the test is finished, and we aim to issue the paperwork without delay so there is no hold-up for tenancy records or a sale. homedata.co.uk records 1,029 sales in the last 12 months, so the local market keeps moving, and electrical paperwork often needs to keep pace with that activity. If you are preparing a property for letting, renewal or sale, booking the EICR early saves a last-minute scramble.
Electrical Installation Condition Report In London

Electrical Installation Condition Report In Plymouth

Electrical Installation Condition Report In Liverpool

Electrical Installation Condition Report In Glasgow

Electrical Installation Condition Report In Sheffield

Electrical Installation Condition Report In Edinburgh

Electrical Installation Condition Report In Coventry

Electrical Installation Condition Report In Bradford

Electrical Installation Condition Report In Manchester

Electrical Installation Condition Report In Birmingham

Electrical Installation Condition Report In Bristol

Electrical Installation Condition Report In Oxford

Electrical Installation Condition Report In Leicester

Electrical Installation Condition Report In Newcastle

Electrical Installation Condition Report In Leeds

Electrical Installation Condition Report In Southampton

Electrical Installation Condition Report In Cardiff

Electrical Installation Condition Report In Nottingham

Electrical Installation Condition Report In Norwich

Electrical Installation Condition Report In Brighton

Electrical Installation Condition Report In Derby

Electrical Installation Condition Report In Portsmouth

Electrical Installation Condition Report In Northampton

Electrical Installation Condition Report In Milton Keynes

Electrical Installation Condition Report In Bournemouth

Electrical Installation Condition Report In Bolton

Electrical Installation Condition Report In Swansea

Electrical Installation Condition Report In Swindon

Electrical Installation Condition Report In Peterborough

Electrical Installation Condition Report In Wolverhampton

Qualified electricians, full wiring safety reports
Get A Quote & BookMost surveyors take 1-2 days to quote.
We'll price your survey in seconds.
Most surveyors take 1-2 days to quote.
We'll price your survey in seconds.





Homemove is a trading name of HM Haus Group Ltd (Company No. 13873779, registered in England & Wales). Homemove Mortgages Ltd (Company No. 15947693) is an Appointed Representative of TMG Direct Limited, trading as TMG Mortgage Network, which is authorised and regulated by the Financial Conduct Authority (FRN 786245). Homemove Mortgages Ltd is entered on the FCA Register as an Appointed Representative (FRN 1022429). You can check registrations at NewRegister or by calling 0800 111 6768.